Universal Marine Remote -Wireless Control of Marine Equipment
Product Details
 
Who We AreProduct DetailsInstallation InstructionsSAVE - 40%- RIGHT NOWRetailersFAQ'sContact UsProduct Registration

 
 

 
Universal Marine Remote
 
                                                                                                  Pro Model
 
 
XL 2000
 
The XL 2000 is our two channel controller - This unit will control one piece of hydraulic equipment such as a Pro Model Hydraulic Shallow Water Anchor or Hydraulic Jack Plate or any piece of hydraulic equipment that already has reversing relays or solenoids as part of its system.
 
Alternatively, the XL 2000 could be used to operate two pieces of equipment that just require on-off switching, such as lights.
 
The Universal Marine Remote consists of an ABS plastic enclosure which houses the electronics. The housing measures approximately 4 1/2" x 3 1/4"
 
 
 
 
 
 
 
 
 

picturegallery60790.tmp/Universal_Marine_Remote.JPG

Each unit includes two hand-held transmitters the size of your typical automobile key fob remote:

All components carry a one-year warranty. We will repair or replace any defective part during the warranty period.

 

 If you need a remote for a power pole

Whether you own a pro model or sportsman model or any other model....

  We believe that The Universal Marine Remote is  the best wireless remote control unit for your Shallow water anchor,  Hydraulic jack plate, Trim & Tilt or other 12V device

 

 

Click Here & Continue to the Installation Page

                                                                                

 

 

 

                                       Built by Fishheads for Fishheads

 

 

 

 

 

 

 

 

 

 

 

 


 


 


 
 Universal Marine Remote
 
Sportsman Model
 
 
 
 

Compact 12VDC Polarity Reversing R.F. Remote Control transmitter & receiver is designed for bi-directional control of DC motors. The output relays are rated at 30A @12VDC.

This Remote system is used to control  12V DC bi-directional motors that do not have reversing relays. The unit includes the reversing relays needed to operate these motors. The key-fob transmitter has two buttons. The left button runs the motor in one direction and the right button runs the motor in the opposite direction. The motor will operate as long as the buttons are held down. There are also three lead wires that allow for an auxiliary On-Off-On switch to be connected. This permits operation of the control without using the transmitter.
 
 
 
 
 
 

   

picturegallery60790.tmp/SportsmanG2.JPG

 


Enter supporting content here